• Best machines

  • Check out our just launched

  • Ask us for more information

Longitudinal seam welding machine (Laser or Tig welding Source)

Longitudinal seam welding machine (Laser or Tig welding Source)

24.200

0 out of 5

The bonding machine consists of:

  • Heavy electro-welded steel construction.
  • Copper bar in Cr-Zr with double cooling duct and gas protection for the interior.
  • Bronze support bar for the iron materials.
  • Motor slip accuracy for carrying the torch through the drive belt on the sliding block extension.
  • Automatic torch transfer and electronic control – conversion system and potentiometer for adjusting the speed from 280 to 3.000 mm./min.
  • Closing clamp pneumatically.
  • ‘’Siemens’’ electronic control type for: automatic cycle – departure delay device carriage- Electronic high-frequency protection panel.
  • Welding speed 18 seconds per linear meter which is tested on AISI 316 stainless steel with a thickness of 0,4 mm.
  • Bonding machine from 5 to 250 Amber, automatic BINZEL torch, electronic panel to control the torch.
  • Thickness: from 0,3 mm to 2 mm.
  • Materials: stainless steel – galvanized sheet metal, copper.
  • Diameter: 80 to 800
  • To improve the product “PSILOS GEORGIOS” reserves the right to make changes without prior notice.
  • CE Marks and Declaration of Conformity

Areas of application:

  • Longitudinal seam welding of pipes and tubes, sheets, strips, special parts…
  • Chimney systems, ventilation systems, ducts
  • Automotive exhaust gas systems, metal bellows, steering elements
  • Air and space travel
  • Filter pipes, sieves, wire gauze
  • Kitchen and household appliances, interior linings, washing drums, honey extractors
  • Housings for electric motors, immersion pumps, stator housings
  • Tank section and tank construction
  • Welding of coil ends in punching lanes

Material:

  • Ferritic steel, austenitic steel and duplex steel, aluminium, copper, nickel superalloys…
  • Metal thickness: 0.15 – 10 mm (depending on fittings)
  • Welding methods: TIG, MIG/MAG, plasma, microplasm

In order to improve the product Metallwork Psilos  reserves the right to make changes without notice.

Description

This plant is the main machine responsible for manufacturing metal chimneys. The materials used are metal sheets of thickness from 0.3 mm to 2 mm and length of ten centimeters to two meters depending on the particular construction. It offers a very nice aesthetic result as well at stainless steel the final stage is a pure white bonding, almost invisible. Finally, the welding time is 1metro per 18 seconds.

Facebook: https://www.facebook.com/metallwork.psilos.5

Youtube: https://www.youtube.com/@georgiospsilos510/videos

send email to metallworkpsilos@gmail.com or georgiospsilos@gmail.com
or call now +306976125732

Reviews

There are no reviews yet!

Be the first to write a review

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

call now +306976125732 or send email georgiospsilos@gmail.com

Complete the collection

  • The bonding machine consists of:

    • Heavy electro-welded steel construction.
    • Copper bar in Cr-Zr with double cooling duct and gas protection for the interior.
    • Bronze support bar for the iron materials.
    • Motor slip accuracy for carrying the torch through the drive belt on the sliding block extension.
    • Automatic torch transfer and electronic control – conversion system and potentiometer for adjusting the speed from 280 to 3.000 mm./min.
    • Closing clamp pneumatically.
    • ‘’Siemens’’ electronic control type for: automatic cycle – departure delay device carriage- Electronic high-frequency protection panel.
    • Welding speed 18 seconds per linear meter which is tested on AISI 316 stainless steel with a thickness of 0,4 mm.
    • Bonding machine from 5 to 250 Amber, automatic BINZEL torch, electronic panel to control the torch.
    • Thickness: from 0,3 mm to 2 mm.
    • Materials: stainless steel – galvanized sheet metal, copper.
    • Diameter: 80 to 800
    • To improve the product “PSILOS GEORGIOS” reserves the right to make changes without prior notice.
    • CE Marks and Declaration of Conformity

    Areas of application:

    • Longitudinal seam welding of pipes and tubes, sheets, strips, special parts…
    • Chimney systems, ventilation systems, ducts
    • Automotive exhaust gas systems, metal bellows, steering elements
    • Air and space travel
    • Filter pipes, sieves, wire gauze
    • Kitchen and household appliances, interior linings, washing drums, honey extractors
    • Housings for electric motors, immersion pumps, stator housings
    • Tank section and tank construction
    • Welding of coil ends in punching lanes

    Material:

    • Ferritic steel, austenitic steel and duplex steel, aluminium, copper, nickel superalloys…
    • Metal thickness: 0.15 – 10 mm (depending on fittings)
    • Welding methods: TIG, MIG/MAG, plasma, microplasm

    In order to improve the product Metallwork Psilos  reserves the right to make changes without notice.

  • The modularity of the system enables the selection of various solutions to correctly meet customer needs, and covers an entire range of automatic sheeting production types. The absolute simplicity and ergonomic features of the equipment eases operator tasks (settings and control), while all the calculations are sent for control. All processes start from the belt and each movement is automatically controlled. The sheeting varies in thickness from 0,5 mm to 1,5 mm stainless steel.

    Configuration composed of:Configuration composed of:

    • Decoiler manual expansion of mandrel, adjustable brake, capacity 5000 Kg, internal diameter of coil min. 350 mm and max. 500 mm.
    • Sheeting input guide with manual regulation on steel plates, processed and milled on work stations.
    • Straightening machine unit with 4 chromed rollers, 90 mm diameter, coupled with driving rollers in rubberized Vulkolan, 100 mm diameter, gear transmission, line movement measuring device with wheel and encoder.
    • Electrical shears : useful light 1050 mm max. thickness 2mm galvanized , 1mm inox.
    • Control panel, piece positioning device and quantity, management software;
    • Processing speed 20m Per minute.
    • Precision control + / – 0,2 mm, Electrical connections and power supplier
      380 V 3 phases + earth 50Hz, 2Kw
    • CE Marks and Declaration of Conformity

    In order to improve the product Metallwork Psilos  reserves the right to make changes without notice.