-
The purpose of this machine is to cut any tube at the suitable length.
Technical details
- Electro-welded frame. Base plate milled
- Dimensions: L 700 mm – W 1000 mm – H 1190 mm;
- Supply: 220 Volt – 1 phase
- Electrical supply of electric panel: 24 Volt Dc
- Material: Stainless steel Aisi 304 or 316, galvanize steel, iron, copper,
- Material Thickness: 0.4 – 0.6mm
- Diameter of the tube: 80 – 550mm
- Length of the tube: 0 – 1000mm
- Elctromotor Power: 0.5kW
- Weight: 200kg
- CE Marks and Declaration of Conformity
In order to improve the product Metallwork Psilos reserves the right to make changes without notice.
-
Functional used welding machine consists of:
- Heavy electro-welded steel construction.
- Copper bar in Cr-Zr with double cooling duct and gas protection for the interior.
- Bronze support bar for the iron materials.
- Motor slip accuracy for carrying the torch through the drive belt on the sliding block extension.
- Automatic torch transfer and electronic control – conversion system and potentiometer for adjusting the speed from 280 to 3.000 mm./min.
- Closing clamp pneumatically.
- ‘’Siemens’’ electronic control type for: automatic cycle – departure delay device carriage- Electronic high-frequency protection panel.
- Welding speed 18 seconds per linear meter which is tested on AISI 316 stainless steel with a thickness of 0,4 mm.
- Bonding machine from 5 to 250 Amber, automatic BINZEL torch, electronic panel to control the torch.
- Thickness: from 0,3 mm to 2 mm.
- Materials: stainless steel – galvanized sheet metal, copper.
- Diameter: 80 to 800
- To improve the product “PSILOS GEORGIOS” reserves the right to make changes without prior notice.
- CE Marks and Declaration of Conformity
Areas of application:
- Longitudinal seam welding of pipes and tubes, sheets, strips, special parts…
- Chimney systems, ventilation systems, ducts
- Automotive exhaust gas systems, metal bellows, steering elements
- Air and space travel
- Filter pipes, sieves, wire gauze
- Kitchen and household appliances, interior linings, washing drums, honey extractors
- Housings for electric motors, immersion pumps, stator housings
- Tank section and tank construction
- Welding of coil ends in punching lanes
We are always open in any kind of check before selling the machine.
-
The machine can operate with at least 1 pre-bending. The number of the pre-bendings depends on the shape of the tube. (Oval Pipes, Eclipse Pipes, Spherical – Round Pipes, Square Pipes. All the edges of these shapes have curves)
Basic Features of the machine
- Decoiler manual expansion of mandrel, adjustable brake, capacity 2000 Kg, internal diameter of coil min. 350 mm and max. 500 mm.
- Metal sheeting input guide with manual regulation on steel plates.
- Straightening machine unit with 6 rollers, coupled with driving rollers, gear transmission, line movement measuring device with wheel and encoder.
- Electrical shears
-
- maximum width 1050 mm of the sheet metal
- max. thickness of the material 0.8 mm galvanized , 0.6 mm inox.
- Control panel, checking device for the positioning and the length of the sheet metal.
- Working feed of the material to the electrical shears: 2m Per minute.
- Precision control + / – 0,2 mm, Electrical connections and power supplier 380 V 3 phases + earth + neutral 50Hz, 4.5Kw, 8 bar pressure
- Transfer belt of the material for rolling process
- CNC Roller
- Max 350mm during the automatic operation
- Max 1000mm during the manual operation
- Extractor mechanism of the formed tube
- Storage place of the formed tube
- CE Marks and Declaration of Conformity
- In order to improve the product our company reserves the right to make changes without notice.