Description
Facebook: https://www.facebook.com/metallwork.psilos.5
Youtube: https://www.youtube.com/channel/UCu2y3I0sNkLK8h0YSsyBTBw
€65.000
A machine that enables chimneys manufacturers to produce fast and cheap unlimited pieces of T-elements. The machine can be used from airducts & exhaust producers as well.
It is accompanied by a European quality certificate CE.
Control Station:
All machine functions are controlled by a plc. The control panel is placed to an ergonomic position, according to the operator’s needs. The robust structure and operating philosophy of the machine meets 100% CE standards with many features as central control display and emergency stop button
Operation:
By putting the parts to be formed in the working position and pressing the hand switch the automatic procedure begins.
Production of each part is completed in two cycles that lasts almost 10 seconds.
Material: | Stainless steel AISI 304 AISI 316 |
Thickness: | 0,4 – 0,5 mm |
Range of diameters: | 80 – 350 mm |
Type of drive: | hydraulic |
Size: | L 800 x W 800 x H 2500 |
Power supply: | 3×400 V/ 50 Hz |
CE Marks and Declaration of Conformity
In order to improve the product Metallwork Psilos reserves the right to make changes without notice.
Facebook: https://www.facebook.com/metallwork.psilos.5
Youtube: https://www.youtube.com/channel/UCu2y3I0sNkLK8h0YSsyBTBw
This site uses Akismet to reduce spam. Learn how your comment data is processed.
The machine can operate with at least 1 pre-bending. The number of the pre-bendings depends on the shape of the tube. (Oval Pipes, Eclipse Pipes, Spherical – Round Pipes, Square Pipes. All the edges of these shapes have curves)
Basic Features of the machine
The machine can operate with at least 1 pre-bending. The number of the pre-bendings depends on the shape of the tube. (Oval Pipes, Eclipse Pipes, Spherical – Round Pipes, Square Pipes. All the edges of these shapes have curves)
Basic Features of the machine
In any case the machine can be adjusted to your needs. Do not hesitate to send us.
Tube forming for:
Tool set for creation reductions
All parts of the machine can be adjusted to your needs. Do not hesitate to send us.
In order to improve the product Metallwork Psilos reserves the right to make changes without notice.
The use of the beading machine is to form beads in thin aluminum, stainless steel, iron, zinc and copper segmental elbows (thickness between 0.4 to 1.5 mm) and diameters from Ø 80 mm up to 1000 mm.
The steel supporting frame in combination with the two, heat treated, forming rollers (adjustable pressure) are capable for a fast and reliable result.
Control Station:
All machine functions are controlled by a plc. The control panel is placed to an ergonomic position, according to the operator’s needs. The robust structure and operating philosophy of the machine meets 100% CE standards with many features as central control display and emergency stop button.
Operation:
By putting the parts to be formed in the working position and pressing the foot switch the automatic procedure begins. The flexibility of the implemented software in the controller allows you to choose whether to work only the male or only the female parts.
The stabilizer roller allows you to keep the pipe in the correct position during rotation.
The time for treating a part is approximately 10 seconds.
BEADING MACHINE | |
Material: | Stainless steel, Galvanized, Aluminum
Cooper, Zinc |
Thickness: | 0,4 – 1,5 mm |
Range of diameters: | 80 – 1.000 мм |
Type of drive: | hydraulic |
Power consumption: | 2.0-2.5 kW |
Power supply: | 3×400 V/ 50 Hz |
Air pressure: | 5.0 Bar |
In order to improve the product Metallwork Psilos reserves the right to make changes without notice.
Reviews
There are no reviews yet!